Whether you are replacing an above ground or in ground pool liner, AAA Liner Replacements is the expert in pool liner installation in the Chicago area.

If your above ground pool liner is looking a bit shabby – replace it! The cost to replace an above ground liner yourself can be less than half the cost of contractors, who typically double their liner cost, and then charge $500-$1000 for labor. A simple weekend project, replacing a pool liner requires only basic tools, and a small pump to drain the pool. How Edit Pdf File Text.

Aboveground pool liner installation does require some specialized knowledge, which you’ll find below – let’s get started! Q: How do I Measure for a New Pool Liner?

A: Very Carefully! This could be the most important step in the process of replacing a pool liner – however, since most aboveground pools have a flat bottom, measuring is much simpler than for inground pools. You’ll need a measuring tape that is longer than your pool, and a helper to hold the other end. For round pools, measure the diameter (across the pool), from wall to wall.

Be sure to measure from the wall, not from the edge of the horizontal top rail. Oval pools will need wall to wall measurements for the width and the length.

For the length measurement, be sure that you are measuring from the exact apex of the curve, to obtain the longest length. Likewise, when measuring the width, measure straight across the pool, be sure that your tape is at right angles to the walls, and not running askew. Wall height (or pool depth), is the next measure to take.

Use a hard measuring tape and measure from the flat floor (not any pool cove), to the top of the pool wall (overlap or Uni-Bead liners), or to the top of the bead receiver (beaded liners). Most above ground pools have a wall height of either 48″, 52″ or 54″.

Double check your wall height measurement in several spots, to be certain. Q: How to Order an Aboveground Pool Liner? A: Select your Type and Size. As mentioned above, there are a few types of.

• fold over the top of the wall, visible from the outside. • hang on the top of the wall, with a thick vinyl hook.

• lock into a track or groove, called a bead receiver. There are other types too. Doughboy pools use an, and Kayak pools have. Q: How Much Do Pool Liners Cost? Ccri Drivers Ed Course Schedule. A: Pool Liner Cost = Size x Type x Thickness Above ground pool liners vary in cost, ranging from $99 for a 12′ round overlap liner, to $660 for an 18×33′ oval beaded liner. Length, width and depth is the main pricing factor.

Add a few dollars for a beaded or uni-bead top edge, and a few more dollars if you opt for a thicker, 25 mil liner, instead of the standard 20 mil pool liner. Pattern is another factor in the price of a vinyl liner. Basic blue is always the cheapest pool liner.

Swirl bottoms add to the cost of a pool liner and an all-over print adds a few more dollars to our. Q: Do I Need Pool Liner Accessories? A: Probably, at least Some Faceplates & Gaskets: It’s always recommended to replace your for the skimmer and return wall fittings.

If you have rust on the wall below either, it would be advised to replace the entire fitting, to ensure a better seal this time around. Wall Foam: If walls are rusty and crusty, protect your new pool liner with, held in place by spray adhesive. Also helps insulate the wall, and gives a nice, soft feel to the wall. Pool Cove: Placed at the base of the wall, these angled foam pieces (4′ long) protect the liner from rust at the base of the wall, and make a nice transition from floor to wall. If you already have, you may be able to reuse it again. Floor Padding: To hide an uneven floor or prevent footprints, to protect the liner from rocks, weeds and insects, or to just give the floor a soft and smooth feel, can be installed between the liner and the floor. Q: How To Install Aboveground Pool Liners?

A: Like this! Drain the Pool: A small submersible pump is best for draining the pool. A pool cover pump will do, or a pump can be borrowed or rented for a day. To get out the last bit of water, cut the liner with a razor knife just above the floor on one side, and lift half of the liner off the floor, to pool the water in a smaller area. Remove the Old Liner: With a large screwdriver or cordless drill, remove the screws on the skimmer and return faceplate. For an overlap liner, you may have to remove the top rail, to be able to remove the coping strips, but if it can be avoided, they are better off left in place.

For beaded or uni-bead liners, just lift and pull to remove the liner from the top of the wall. Cut up the liner into strips and roll them up. Set them out with your recycling (vinyl is recyclable!). Floor & Wall Prep: Walls can be wiped clean if they have any dusty, crusty deposits. If there are rusty deposits, scrape and paint and then cover with wall foam. Wall dents or crumples can usually be straightened out with a heavy hammer and two 2×4’s, one on each side of the wall.

Most aboveground pools have sand floors. Using flat trowels, or wood floats, smooth out the sand, shaving off high spots and filling low spots. If you have weeds, rocks or algae in the sand, it’s best to replace with fresh masonry sand (without small pebbles), or install Liner Shield or Happy Bottom floor padding.

Drape the New Liner: With 1 or 2 helpers, pull the liner carefully over the pool and over the wall (overlap and uni-bead liners), or lock it into the track (beaded liners). Once you get the liner hooked in place in several locations around the pool, work around the pool, adjusting and evenly attaching the remainder. Overlap liners commonly use coping strips to hold the liner in place. Pull the liner over the wall until it’s just off the floor by 1-2 inches, and snap on the strips. For beaded and uni-bead liners, just pop the liner in place, and pull out any floor wrinkles toward the wall.

Fill the Pool: We’re almost done now! Drop in a garden hose (or two), and fill the pool, keeping an eye on overlap liners to be sure that they don’t slip down the wall.

Fill the pool all the way to the top before proceeding to the next step. Install New Faceplates & Gaskets: With the liner stretched into place, you can now screw on your skimmer and return faceplates, tightening down the screws as hard as you can. Be sure to use a properly sized Philips head, usually a #3, so you don’t strip the screw heads.

Once they are tight, use a razor knife to cut out the vinyl inside of the faceplate (connect your pump/filter hoses first!). You can now test and balance your pool water, and jump in the pool! Enjoy your ~ and the money you saved!

Sheryl Sollis InTheSwim Staff Blogger.

A solid liner is critical to your swimming pool and should be inspected every year for any damage. If you determine that you need to replace your pool liner, we’re here to help. We have prepared a helpful guide to get you started replacing your liner. Drain the Pool The first thing you need to do is drain the pool, this can be done in a few different ways and varies depending on the pool.

You can use a sump pump or can use your and turn your pump to waste and it should start pumping out the water. Removing the Old Liner You will now need to remove your; this is the piece on the top of the wall that actually secures the liner in place. Once the top cap / rail is off you can discard the old liner. Once the liner has been removed you should inspect the walls and floor to make sure there is nothing that could potentially damage the new liner. The New Liner At this point, make a note of the size of your above ground swimming pool or measure it if you don’t know before proceeding. Next, you need to purchase a new.

A word of caution, purchasing the cheapest liner available may not always be the best for your pool’s needs. It’s best to consider the thickness (gauge) of the liner you are purchasing and it often determines how durable the liner will be. Also, its suggested to purchase some additional preventative since you have the primary liner out. A good way to do this is purchasing a Liner Guard to protect the bottom of your pool from any foreign objects puncturing the bottom of your swimming pool. Is made from a geotextile material this gives the bottom of your pool soft cushy feeling while protecting your liner from foreign objects like rocks and tree roots.

But, the best way to save yourself time and money in the future is purchasing a, these kits use hard flat polymer material that give you a super smooth pool bottom that reduces your need for using sand and of course, it adds the additional protection you are looking for your pool. Installation It is a good idea to install on a warm sunny day to allow the new liner to become more flexible and relax the wrinkles. You should lay out the liner according to the instructions or labels on the liner.

Make sure that the liner seams meet where the wall and floor meets. Once you have the position right, pull the liner evenly over the walls until a small center area is still touching the ground. The liner should be draped over the wall, now you need to attach top cap of the wall over the liner but DON’T fasten it down. This will give the liner some support while filling, you can now start to add the water. As the pool starts to fill up remove portions of the top caps to release more of the liner evenly around the pool.

You should work your way around the pool repeating this process until the entire pool floor is filled with 6 inches of water and your liner is properly positioned. Now attach the and fasten it down to hold the liner in position. Continue filling and that’s completes your install of an above ground swimming pool liner. Before you start your pool pump you might need to prime it to avoid running without any water and damaging the pump.

Protect your pool liner with PoolSupplyWorld’s complete selection of. Hi Carman, that’s a great question. It depends on the type of liner you have. Overlap liners are held in place by, which are installed over the liner and under your top rail. Bead liners hook into a bead receiver that sits just under the top rail, on the inside of your pool. This style of liner is ideal if you have a deck system, because if you ever need to remove the liner you can simply drain the pool and lift the liner out of the track without disassembling the deck. Check out our blog, for more information.

Hi Ray, we strongly recommend you remove your old liner before installing your replacement liner as not doing so may void the warranty on the new liner and could cause an improper fit, which could lead to future issues with your new liner. Once you remove your liner, you should thoroughly inspect your pool walls and floor to make sure there is nothing which will puncture your new liner. For added liner protection, we recommend a, which will help prevent rocks, roots and other objects from puncturing your liner. Please let us know if we can be of any further assistance. Hi Katherine, when installing a pool liner, once the pool is constructed and the liner is in place, you should slowly fill the pool up to 1″. At this point, you can work out any wrinkles in the bottom of the liner.

Once the bottom of the liner is wrinkle-free, you should fill the pool about halfway. This will be the point when you will install your skimmer and return(s). The proper way to install your pool’s skimmer and return(s) should be outlined in the installation instructions of your skimmer’s owner’s manual. To do so you will have to cut the liner. After installing your skimmer and return(s), you can then fill the pool the rest of the way. For a step-by-step video on installing an above ground pool, including liner, please feel free to check out our video and blog.

The liner portion is at minute 19:30. If you have any further questions, please don’t hesitate to ask.